Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Expansion Tank

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Radiator

See other generations:
Video tutorial

First, perform the removal of the coolant expansion tank with the engine cold for obvious reasons. Start by removing the gasket around the edge of the plastic cover of the cooling fan, then take off the cover by extracting the push clips: one of the clips also secures the tank.

Once the plastic cover is removed, unscrew the clamp of the recovery hose connected to the radiator and pull it out. Next, unscrew the plastic screw near the cap of the tank and remove it along with the recovery hose after disconnecting the tube at the bottom.


Updated on 11 February 2026 by ScegliAuto


Related tutorials

Tips for Removing the Expansion Tank
Tips for Removing the Expansion Tank
BMW Serie 5 (1995-2003 / E39) This tutorial provides some tips explaining the procedure to remove and replace the expansion tank from a BMW 5 Series. First, remove the screw that …
Adding Antifreeze to the Engine Radiator
Adding Antifreeze to the Engine Radiator
BMW Serie 5 (1995-2003 / E39) In extremely cold temperatures, it is advisable to add antifreeze to the radiator to prevent engine damage. Mark the original position of the expansi…
How to Replace the Engine Coolant
How to Replace the Engine Coolant
BMW Serie 5 (2003-2010 / E60, E61) Maintaining your vehicle is an aspect that should not be overlooked to keep it running efficiently. Among the maintenance tasks, consider replacing t…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos