Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Sunshade support installation

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Accessory Kit
Operation: Sunshade support installation

The sunshade device installed on the under-roof of the passenger compartment is fixed through two supports: one external (on the side of the door) equipped with a hinge which, in addition to lowering the sunshade, allows it to rotate towards the side window and one internal (from the side of the rear view mirror) equipped with an opening that allows both to rotate the sun visor and to release it. In order to replace this support, first open the protective caps of the screws and unscrew the latter; then remove the old support and apply the new one with the opening facing the passenger compartment; once the screws have been tightened, close the caps.


Posted on 26 July 2023 by ScegliAuto



Replacement of front shock absorbers
BMW Serie 5 (2003-2010 / E61, E60) In order to replace the front shock absorbers, it is first of all essential to have the appropriate clamps available to compact the spring and theref
Camshaft Sensor Removal and Installation
BMW Serie 5 (1995-2003 / E39) The steps required to perform the operation shown in the guide below consist of: 1) remove the battery cover of your car, 2) disconnect the negative
Disassembly of the exterior rearview mirror
BMW Serie 5 (1995-2003 / E39) Once the exterior rear-view mirror has been removed from the door, it can be completely disassembled by separating all its components: start by unhoo

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos