Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to adjust the suspension of the BMW 7 Series?

Model: BMW Serie 7 F02, F01, MK 5 - Years 2008-2015
Part: Checks and maintenance

The BMW 7 Series is equipped with suspension that can be adjusted so that the car's attitude can be lower or higher to suit your driving needs or road conditions. To be able to adjust the trim, it is therefore necessary to press the appropriate button located on the central tunnel, next to the handbrake button. The button light will start flashing and the car's trim will have changed when it goes out. It will then be possible to raise and lower the suspension by pressing the button and waiting for the corresponding light to go out completely.

Posted on 25 March 2022 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Suspension Arm of Your Car
How to Replace the Suspension Arm of Your Car
BMW Serie 7 (1994-2001 / E38, MK 3) The suspension arm of your car connects the chassis to the struts. If it bends or wears out, it must be replaced as it could lead to loss of vehicle …
Replacing the Front Suspension Arm
Replacing the Front Suspension Arm
BMW Serie 7 (2001-2008 / E68, MK 4, E67, E65, E66) To replace the suspension arm, start by lifting the vehicle and removing the front wheel; then, unscrew the fastening nut of the ball joint attached …
Where is the fuse box located in the cabin of the BMW 7 Series F01?
Where is the fuse box located in the cabin of the BMW 7 Series F01?
BMW Serie 7 (2008-2015 / F02, F01, MK 5) If you are looking for the fuse box in the interior of your BMW 7 Series F01, then all you have to do is follow the steps described in our new guide.…

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos