Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Applying Protective Wax to the Body

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Checks and maintenance

Applying protective wax to the body is an excellent solution to preserve the shine of the paint over time and should be done at least annually. There are many good products available, and the application technique is generally the same for all. First, ensure that the body is clean and cool (avoid applying wax to a hot body).
Apply the wax using cotton or the special applicator pads typically included with the wax; wait a few minutes until a dull film forms and remove it using a microfiber cloth. It is suggested to work on one section at a time rather than applying wax to the entire body and then removing it: excessive drying may make removal difficult.

Updated on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Polishing/Waxing the Car Body
Polishing/Waxing the Car Body
BMW Serie 3 (1998-2006 / E46) Before proceeding with polishing the car body, here are some useful tips. Ensure the body is clean and dry: dust residues can scratch, and water or h…
How to Restore Plastic Trim on Your Car's Body
How to Restore Plastic Trim on Your Car's Body
BMW Serie 3 (2005-2013 / E91, E90, E92) A well-maintained body significantly enhances the appearance of your car. This guide shows how to restore the look of your vehicle's plastic trim usi…
Headlight Restoration Instructions
Headlight Restoration Instructions
BMW Serie 3 (1998-2006 / E46) Due to sun exposure, bugs, and car wash additives, the outer coating of the headlight tends to deteriorate and yellow, becoming cloudy and showing cr…

    Frequently Asked Questions

    • Serie 3 2012-2019 - How much does a service cost for the BMW 3 Series? Read answer
    • Serie 3 2005-2013 - Why is the on-board computer of the BMW 3 Series slow to start up? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos