Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to manually close and open the top of the BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Convertible top

Let's go and see in this guide the instructions that will allow us to manually open and close the top of the BMW 3 Series. First of all we open the tailgate of the boot and start to manually raise our top; let's then hook it on the upper part of the windshield, as shown in the video. To remove the hood, simply unhook it and reposition it inside the special compartment, pulling the lever on the sides to open it; we arrange our hood correctly, then repairing the automatic opening and closing!

Posted on 23 May 2022 by ScegliAuto

Video tutorial

Related tutorials

How to sync and reset the BMW 3 Series convertible top
How to sync and reset the BMW 3 Series convertible top
BMW Serie 3 (1990-2001 / E36) We see in this guide the instructions that will allow us to reset and synchronize the convertible top of the BMW 3 Series, by following these simple …
How to configure and open the roof of the BMW 3 Series e46 with the remote control
How to configure and open the roof of the BMW 3 Series e46 with the remote control
BMW Serie 3 (1998-2006 / E46) The guide shows how to configure the remote control in order to open the roof of the BMW 3 Series e46. The roof can be opened by holding down the rem…
Guide to Removing the Convertible Top and Re-Synchronizing the Motor
Guide to Removing the Convertible Top and Re-Synchronizing the Motor
BMW Serie 3 (1990-2001 / E36) The first step shown in the video is removing the central bearing of the rear seatback. Then, simply grasp it from the bottom, lift it up, and remove…

How to Remove the Steering Wheel Airbag on a Fiat Panda

How to remove the steering wheel airbag on a Fiat Panda? Before removing the car's steering wheel, disconnect the battery terminals located in the engine bay. Here's how to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then unscrew the screws/fasteners of the steering wheel cover (where the airbag is located) using a socket wrench or screwdriver. Once the airbag is released (driver's side), disconnect the power connectors and remove it from the steering wheel. For reassembly of the airbag: connect the power connectors and fit the airbag with the screws.

Watch the video!


by ScegliAuto

More videos