Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Configure and Open the Sunroof of the BMW 3 Series E46 with the Remote

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Key

This guide shows how to configure the remote to open the sunroof of the BMW 3 Series E46. You can open the sunroof by pressing and holding the open button on the remote; the reverse operation is done by pressing and holding the close button. To configure, insert the key into the ignition switch and turn it to the second position. Connect an OBD reader (such as CARLYBMW) and open the app on your phone. Go to the coding page and activate the convenience option. Save the changes and remove the key. Insert it again and turn it back to the second position. Remove the key. The operation is complete.

Updated on 1 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Sunroof Panel of a BMW 3 Series
How to Remove the Sunroof Panel of a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) How do you remove the sunroof panel of a BMW 3 Series? Let's see how to proceed in this video. Start by removing the side handles of the panel with a…
How to Open the BMW 3 Remote Key
How to Open the BMW 3 Remote Key
BMW Serie 3 (1998-2006 / E46) Need to replace the remote key for your BMW 3 Series? Let's go through the disassembly. Take your remote key and use a screwdriver to pry between the…
How to Open the Door of a BMW 3 Series with the Key
How to Open the Door of a BMW 3 Series with the Key
BMW Serie 3 (1998-2006 / E46) How do you open the door of your car with the metal key from the remote on a BMW 3 Series? Take your remote and press the button to extend the metal …

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos