Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cup Holder

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Accessory kit

The following guide shows how to remove the cup holder in your car. This operation is surprisingly simple. First, open the cup holder. Then, use a finger to hold the cover open, where the cup symbol is located, and disengage the cup holder mechanism. If you pay attention, you will notice two metal tabs on the sides of this mechanism. Using your hands, pull the two tabs inward, toward each other, and pull them to release everything.

Updated on 13 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front door panel of the BMW 5 Series
How to remove the front door panel of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) In this short guide we will see the instructions for disassembling and replacing the front door panel of the BMW 5 Series. First, open the front door…
Replacing Your Car's Front Headlight
Replacing Your Car's Front Headlight
BMW Serie 5 (1995-2003 / E39) For minor issues like replacing your car's front headlight, you can try to do it yourself to save some money. The following guide shows you how. Once…
How to disassemble the power window mechanism of the BMW 5 Series.
How to disassemble the power window mechanism of the BMW 5 Series.
BMW Serie 5 (1995-2003 / E39) In this short and simple guide, we will see the procedure that will allow us to disassemble and replace the window regulator mechanism of the BMW 5 S…

How to Change the Brake Pads on a Volkswagen New Beetle

Learn how to change the front brake pads on a Volkswagen New Beetle. First, lift the car on a column lift to the desired height, then remove the wheel (using a telescopic spanner or air impact wrench) along with the respective bolts. Unscrew the locking bolt of the brake caliper, remove it from the wheel hub support, and detach the pads from the brake caliper using a screwdriver. Install the new pads on the brake caliper and refit the brake caliper to the support; tighten all bolts and remount the wheel. Proceed to perform the same operations on the other calipers present on the vehicle.

Watch the video!


by ScegliAuto

More videos