Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the BMW i3?

Model: BMW i3 MK 1 - Years 2013-2022
Part: Service warning light

To reset the service light on the BMW i3, turn on the instrument cluster and then press and hold the button to the left of the display, as indicated in the video. The maintenance interval will appear, and you will need to repeatedly press the same button until the message "Reset possible" appears. Then, hold the button for a few more seconds until the message "Reset in progress" appears, followed by "Reset successful". Turning the cluster off and back on will allow you to verify the reset.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on the BMW I3?
How do you reset the Service light on the BMW I3?
BMW i3 (2013-2022 / MK 1) In order to reset the Service light of the BMW I3, you need to turn on the instrument panel and then press the button located on the left side of the…
How to Reset the Battery After Replacement on a BMW i3
How to Reset the Battery After Replacement on a BMW i3
BMW i3 (2013-2022 / MK 1) Let's see how to proceed after replacing the battery on the BMW i3: we are referring to the 12V battery, which requires a registration procedure to i…
How to restore the service indicator on the BMW i3
How to restore the service indicator on the BMW i3
BMW i3 (2013-2022 / MK 1) .. In this video we are shown how to reset the service light on the BMW I3. The procedure is very simple and takes less than 1 minute.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos