Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio Frame with Protective Door

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Dashboard

See other generations:
Video tutorial

In this guide, you will remove the protective door that may cause issues with opening or closing. Once you fully lower the glove compartment, remove the protective cap from the side screw near the door latch.

Next, unscrew the internal screws at the bottom and top. It is recommended to remember the position of each screw as they are all different. Now, remove the faux wood trim to expose and unscrew the other screws.

Then, proceed to unscrew the frame screws. At this point, simply move the lower part of the dashboard to facilitate the removal of the frame.

Car model: BMW E39 M5 540 530 Required tools: Phillips screwdriver, panel clip tool, 7mm socket wrench with extension.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

Removing the Rear Door Panel
Removing the Rear Door Panel
BMW Serie 5 (1995-2003 / E39) To remove the rear door panel, start by unscrewing the lock, disconnecting the window switch, and removing the protective cap over the screw inside t…
Removing the Center Panel and Radio on BMW 5 Series
Removing the Center Panel and Radio on BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Obtain a plastic wedge and first, remove the long horizontal panel that houses the center air vents. This panel extends to the passenger side air ven…
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
Disassembly and Replacement of the Cabin Fan in a BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Here are step-by-step instructions to disassemble and replace the cabin fan in your BMW 5 Series. First, get inside the vehicle and begin removing th…

Fuses Placement and Diagram for the Mercedes Vito

Check the diagram and placement of the fuse boxes for the Mercedes Vito by following the instructions below. First, open the bonnet and locate the external fuse box; you will find it by removing the plastic cover situated at the top of the engine compartment, as shown in the video. At this point, find another fuse box in the cabin, specifically under the driver's seat; use the owner's manual to find the fuse diagram and replace any faulty fuse with a new one that has the same amperage rating.

Watch the video!


by ScegliAuto

More videos