Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the BMW X3 Mirror Bulb

Model: BMW X3 MK 3, G01 - Years 2017-2024
Part: Side marker bulb

To replace the mirror bulb, use a tool to pry off the mirror glass from its housing. Once the glass is removed, take out the clips located at the top of the housing to completely detach the cover. This will allow you to unscrew the screws at the bottom of the housing to extract the headlight and disconnect its connectors. At this point, you can remove the bulb from the headlight and replace it with a new one.

Updated on 11 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Side Mirrors on a BMW X3
How to Adjust the Side Mirrors on a BMW X3
BMW X3 (2017-2024 / MK 3, G01) In this guide, you will find instructions to adjust the side mirrors on a BMW X3. First, get in the vehicle and turn on the ignition by pressing the …
How to Replace the Headlight Bulb on a BMW X3
How to Replace the Headlight Bulb on a BMW X3
BMW X3 (2017-2024 / MK 3, G01) Before you start, open the hood of your BMW X3. First, unscrew and remove the rear cover of the burnt-out bulb. Next, disengage the burnt-out bulb an…
How to automatically close the rearview mirrors of the BMW X3
How to automatically close the rearview mirrors of the BMW X3
BMW X3 (2017-2024 / MK 3, G01) This short and simple guide will show us how to automatically close and open the electric external rearview mirrors, both from the inside and outside…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos