Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight of the BMW X3

Model: BMW X3 E83, MK 1 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight

See other generations:
Video tutorial

In this short guide, we will see the steps that will allow us to disassemble and replace the front headlight of the BMW X3. First, we open the hood of the car and start unscrewing all the fixing screws we find on the top and bottom of the front bumper; we remove the additional screws we find on both sides of the fenders, as shown in the video.

At this point, we detach the front bumper, unscrewing the screws of the headlight group and disconnecting the electrical connector of the lights to remove it and replace it with the new one; we then reassemble the front headlight and the bumper!


Posted on 28 July 2025 by ScegliAuto


Related tutorials

How to Remove the Headlight Bulbs on a BMW X3
How to Remove the Headlight Bulbs on a BMW X3
BMW X3 (2003-2010 / E83, MK 1) Let's see how to replace the headlight bulbs on a BMW X3. Open and lift the hood of the engine compartment. Locate the inspection cap of the headligh…
How to Replace the Headlight Bulbs on a BMW X3
How to Replace the Headlight Bulbs on a BMW X3
BMW X3 (2003-2010 / E83, MK 1) Do you want to replace the headlight bulbs on a BMW X3? Let's see how to proceed: open the hood by pulling the lever located at the bottom right of t…
How to replace the headlight bulb of the BMW X3
How to replace the headlight bulb of the BMW X3
BMW X3 (2003-2010 / E83, MK 1) Today we will explain how to replace the headlight bulb of the BMW X3, model e83. We need to open the front hood and remove the headlight cap, discon…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos