Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to replace the rear light bulb on the BMW X3?

BMW X3 - Video tutorial

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Rear light bulb
Operation: How to replace the rear light bulb on the BMW X3?

In order to replace the rear light bulb of the BMW X3, you have to open the tailgate so that you can have access to the side part of the corresponding headlight: here you will find a plastic cover that must be removed in order to loosen the bolts. underlying. When these have been unscrewed, it will be possible to remove the headlight from inside its housing by disconnecting the connectors connected to it. After the headlight has therefore been removed, it will be necessary to open it at the rear and remove the bulb inside it; after replacing the bulb, the headlight can be reconnected and fixed in its seat.


Posted on 9 October 2022 by ScegliAuto



Removing the rear light on BMW X3 F25
BMW X3 (2010-2017 / F25, MK 2) Raise the boot lid and remove the flap behind the affected light. Unscrew the 8 mm screw and remove the retaining clip. This simple operation will su
How to replace the headlight bulb on a BMW X3
BMW X3 (2017-2024 / MK 3, G01) Before starting, we will have to open the front hood of our BMW X3. Let's start by unscrewing and removing the back cover of the burned out light bul
How to replace the rear headlight bulb in the BMW X3?
BMW X3 (2010-2017 / F25, MK 2) In this tutorial, we can see how to replace the rear headlight bulb in the BMW X3, a very simple and quick operation. First of all, make sure that th

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos