Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. X3
    4. : How to remove the rear lights in the BMW X3?

BMW X3 - Video tutorial

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Tail light
Operation: How to remove the rear lights in the BMW X3?

In this tutorial we can see how to remove the rear lights in the BMW X3, an extremely simple and fast operation, to be carried out in case we need to replace a bulb or the headlight itself. First of all, make sure that the key is not inserted, then open the boot lid and, with a 10mm socket wrench, unscrew the two bolts located along the inner edge of the light. Once this is done, let's grab it, pull it out and separate it from the bodywork. At this point we can disconnect the power connector and proceed with the replacement of the damaged element.


Posted on 27 September 2022 by ScegliAuto



Where are the fuses located in the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) On the BMW X3, all the fuses are located inside the appropriate fuse boxes that are installed within the vehicle: in this type of car, there are two
Where are the fuses located in the BMW X3?
BMW X3 (2003-2010 / MK 1, E83) Inside the BMW X3, there are two boxes where the fuses are located: the first one is positioned inside the cabin, at the rear of the glove compartmen
Where are the fuses of the BMW X3 located?
BMW X3 (2010-2017 / F25, MK 2) The fuses of the BMW X3 are placed inside the special fuse boxes that are installed inside the vehicle: in this car model there are two fuse boxes. T

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos