Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulb on a BMW X3?

Model: BMW X3 MK 2, F25 - Years 2010-2017
Part: Tail light bulb

In this tutorial, you will see how to replace the rear headlight bulb on a BMW X3, a very simple and quick operation. First, ensure that the key is not in the ignition, then open the trunk and detach the plastic panel located on the inner edge of the headlight in question. Next, remove the two screws that were just exposed using a 10mm socket wrench, separate the headlight from the body, and disconnect the power connector. At this point, simply detach the inner plate, replace the faulty bulb, and follow the reverse procedure.

Updated on 1 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Rear Headlight Bulbs on BMW X3
Replacing Rear Headlight Bulbs on BMW X3
BMW X3 (2003-2010 / MK 1, E83) Are the rear headlight bulbs blown? Don’t worry, let’s see how to replace them on a BMW X3. Open the trunk by pressing the electric button. Locate th…
Removing the Rear Headlight on BMW X3 F25
Removing the Rear Headlight on BMW X3 F25
BMW X3 (2010-2017 / MK 2, F25) Lift the trunk lid and remove the cover located behind the affected headlight. Unscrew the 8 mm screw and remove the retaining clip. This simple oper…
How to Replace the Headlight Bulb on a BMW X3
How to Replace the Headlight Bulb on a BMW X3
BMW X3 (2017-2024 / MK 3, G01) Before you start, open the hood of your BMW X3. First, unscrew and remove the rear cover of the burnt-out bulb. Next, disengage the burnt-out bulb an…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos