Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Overhead Handle

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Handle

The overhead handle supports passengers and helps them exit the cabin by grabbing and pulling themselves up. To remove this handle, rotate it downward to detach it from the headliner and open the caps that cover the mounting screws. Next, unscrew the screws and complete the removal by pulling the handle from its seat, being careful not to damage the edges of the headliner. Then, reverse the process to reinstall it, aligning the handle's reinforcement ribs with the holes in the headliner before tightening the mounting screws and closing the caps.

Updated on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to close and repair the sunroof of the BMW 5 Series.
How to close and repair the sunroof of the BMW 5 Series.
BMW Serie 5 (2003-2010 / E60, E61) In this video tutorial, we will see how to close and repair the sunroof of the BMW 5 Series, following the instructions below. First, we get into the…
How to reset the panoramic sunroof of the BMW 5 Series
How to reset the panoramic sunroof of the BMW 5 Series
BMW Serie 5 (2017-2024 / G30) The instructions in this guide will show us how to reset the sunroof motor of the BMW 5 Series. First, we get into the car and start the dashboard; t…
Removing Some Parts of Our Car Located on the Roof
Removing Some Parts of Our Car Located on the Roof
BMW Serie 5 (1995-2003 / E39) In this video, check the removal of some parts of our car, specifically the roof. To remove these roof parts, use a screwdriver to gently pry off the…

Other guides you may be interested in

How to Install Roof Bars on a Fiat 500X

Learn how to equip your car with universal roof bars. Universal roof bars are used on cars with and without roof rails (fixed bars secured to the car roof). Install the roof bar kit as shown in the video with the bars calibrated according to the width of the car. Position the brackets at both ends of the doors on the car's original roof rails. Once the width of the anchoring brackets is adjusted, tighten the bolts with the butterfly nut (if a lock is present) until fully secured to the roof rails. Finally, apply the safety caps on your Fiat.

Watch the video!


by ScegliAuto

More videos