Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the roof sky of the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006

Following these brief instructions, we will see how to dismantle and replace the headliner or interior roof lining of the BMW 3 Series. First of all, we get on board the cabin and start dismantling and removing the plastic side pillars, levering on the sides and unscrewing the screws found under the covers; then we remove the interior lights, grab handles, and sun visors, as shown in the video. At this point, we move on to removing the headliner, starting from one corner until the complete removal of the lining, following the video tutorial until the end!

Posted on 7 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing and Replacing the Headliner of the BMW 3 Series
Removing and Replacing the Headliner of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, you will see the instructions that will allow you to remove and replace the headliner of the BMW 3 Series. First, get inside the vehicle and s…
How to Remove the Headliner in a BMW 3 Series?
How to Remove the Headliner in a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) In this tutorial, you will see how to remove the headliner in a BMW 3 Series, a very simple and quick operation. First, open the trunk. Then, remove …
How to Remove the Headliner and Roof Handles of the BMW 3 Series
How to Remove the Headliner and Roof Handles of the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to remove the headliner, roof handles, and sun visors of the BMW 3 Series by following the instructions be…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos