Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Front Springs

Model: BMW X5 E53 - Years 1999-2006
Part: Shocks

To change the front springs of a car, remove the wheel bolts using a power tool or a standard wrench. Next, use a 19mm wrench and a 5mm socket to remove the shock absorber bolt. Then, use a 22mm wrench to remove the second bolt that secures the shock absorber to the brake rotor; after that, remove the coolant reservoir with the appropriate tool to create space. At this point, using a 13mm socket, remove the third shock absorber bolt and pull it out. Finally, remove the spring link cup and take out the spring with the help of a puller, using a 22mm wrench and the appropriate tool.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight bulbs in the BMW X5?
How to replace the front headlight bulbs in the BMW X5?
BMW X5 (2007-2013 / E70) In this tutorial, we can see how to replace the front headlight bulbs in the BMW X5, an extremely simple and fast operation. First of all, make sure …
Instructions for Removing Climate Control Switches
Instructions for Removing Climate Control Switches
BMW X5 (1999-2006 / E53) Removing the climate control display is very simple: just locate the position of the retaining clips and press them with a small screwdriver to relea…
Rear Shock Absorber Replacement
Rear Shock Absorber Replacement
BMW X5 (1999-2006 / E53) Replacing the rear shock absorber is much simpler than the front ones since the spring and the damper are separate; essentially, lift the vehicle on …

How to Replace the Headlamp Bulb on a Kia Sportage

To replace the headlamp bulbs on a Kia Sportage: open the bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holders back into the headlamp housing. Test the fitted bulbs on the vehicle.

Watch the video!


by ScegliAuto

More videos