Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulbs on a BMW X5?

Model: BMW X5 E70 - Years 2007-2013
Part: Headlight bulb

In this tutorial, you will see how to replace the headlight bulbs on a BMW X5, a very simple and quick operation. First, ensure the key is not in the ignition, then open the hood, locate the large cap at the back of the headlight, and remove it. Next, disconnect the power connector, unclip the metal retaining clip, and pull out the old bulb from the housing. At this point, simply insert the new bulb, avoiding direct contact with the glass, and reassemble everything by following the reverse procedure.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Headlight Bulbs on BMW X5
BMW X5 (2007-2013 / E70) Want to remove the front headlight bulbs? Let's see how to disassemble the front headlight of a BMW X5. Lift the hood, locate the inspection cover fo…
Replacing the Interior Dome Light Bulbs of the BMW X5
Replacing the Interior Dome Light Bulbs of the BMW X5
BMW X5 (1999-2006 / E53) In today's tutorial video, you will learn how to remove and replace the interior dome light bulbs of the BMW X5. First, get inside the vehicle and us…
How to Replace the License Plate Bulbs on the BMW X5
How to Replace the License Plate Bulbs on the BMW X5
BMW X5 (2007-2013 / E70) In this video tutorial, you will learn how to remove and replace the license plate bulbs on the BMW X5 by following these simple steps. First, move t…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos