Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Z4
  6. : Shift knob

BMW Z4 - Shift knob

Shift Knob BMW Z4 (2002-2008 / e 85, e 86)

BMW Z4 (2002-2008 / E85, E86)
How to Replace the Shift Knob on a BMW Z4?

To replace the shift knob on a BMW Z4, grasp the knob while securely holding the leather boot underneath. The two parts are not directly connected, so you need …Read all…
Posted on 5 August 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Replacing the Shift Knob on BMW Z4

Today, you will learn a very simple task that many do not know, which is replacing the shift knob on a BMW Z4 coupe. Put the gear lever in "D" for "Drive" and, …Read all…
Posted on 30 May 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Shifter Knob Replacement on BMW Z4

Today, you will perform a very simple maintenance task: replacing the shifter knob on a BMW Z4. This procedure is particularly easy because, to remove the …Read all…
Posted on 19 May 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Replace the Shift Knob on BMW Z4

Do you want to replace the shift knob on your BMW Z Series? Here’s how to proceed with the replacement: First, take the knob and position it vertically. …Read all…
Posted on 23 March 2026 by ScegliAuto

Shocks (1) Car stereo (4) Convertible top (5) Body (1) Key (5) Checks and maintenance (1) Dashboard (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (5) Grille (2) Accessory kit (1) Headlight bulb (4) (1) Engine (1) Starter motor (2) Door trim panel (2) Hydraulic pistons (1) Shift knob (4) Fuse box (12) Crankshaft position sensor (1) Side mirror (1) (2) Service warning light (5) Windshield wipers (1) Side window (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos