Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Z4
    4. : Car stereo

BMW Z4 - Car stereo

Car Stereo BMW Z4 (2002-2008 / e 85, e 86)

BMW Z4 (2002-2008 / E85, E86)
How to Remove the Radio from a BMW Z4
How to remove the radio from a BMW Z4? Let's carefully see in this video how to perform the disassembly: use plastic or metal levers to remove the stereo; …Read all…
Posted on 24 March 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Instructions for Disassembling the Navigation Unit
To disassemble the satellite navigation system unit, you first need the appropriate extraction keys: these are two U-shaped steel wire elements with tapered …Read all…
Posted on 23 February 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Instructions for Removing the Navigation Display
To remove the navigation display located in the center of the dashboard, first remove the air vents and then the radio. The air vents are secured with clips …Read all…
Posted on 22 February 2026 by ScegliAuto
BMW Z4 (2002-2008 / E85, E86)
Removing Your Car's Radio
This guide shows how to change your car's radio in a few simple steps. Using a screwdriver, insert a lever on the sides of the radio to release the internal …Read all…
Posted on 15 February 2026 by ScegliAuto
Shocks (1) Car stereo (4) Convertible top (5) Body (1) Key (5) Checks and maintenance (1) Dashboard (1) Headlight (2) Tail light (1) Air filter (1) Cabin air filter (5) Grille (2) Accessory kit (1) Headlight bulb (4) (1) Engine (1) Starter motor (2) Door trim panel (2) Hydraulic pistons (1) Shift knob (4) Fuse box (12) Crankshaft position sensor (1) Side mirror (1) Tire pressure warning light (2) Service warning light (5) Windshield wipers (1) Side window (1) Steering wheel (1)

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos