Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Buick
    3. :
  3. Verano
    4. : How to replace the pollen filter on Buick Verano

Buick Verano - Video tutorial

Model: Buick Verano MK 1 - Years 2010-2017
Part: Cabin air filter
Operation: How to replace the pollen filter on Buick Verano

In this video tutorial we can see how it is possible to replace the pollen filter on Buick Verano. In order to replace the cabin filter we can follow a simple procedure: the first thing to do is to buy a new pollen filter from an authorized dealer; next step we have to get in the car, turn off the car and pull the handbrake. The pollen filter on this car can be found inside the car behind the glovebox, so we have to empty the compartment and then remove the fasteners that we find inside the compartment; unhook the side panel of the compartment and unscrew the fixing screw; now we have to unscrew the three screws located under the glove compartment; once all the screws that secure the compartment have been removed, we can remove it from its seat and disconnect the connected cable. Remove the filter cover and take out the old filter element. Position the new filter following the indications of the arrows.


Posted on 11 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos