Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the engine oil life of Buick LaCrosse Mk2.

Model: Buick Lacrosse MK 2 - Years 2010-2016
Part: Warning light – error code

The guide shows how to reset the engine oil indicator light on the Buick LaCrosse Mk2. After turning on the dashboard, use the "Menu" button on the left-hand lever of the steering wheel to go to the tab related to the engine oil life. At this point, select the option with the "SET/CLR" button and use it again to activate the reset procedure. Using the knob on the left-hand remote control, select the reset option and wait for the procedure to finish. If the procedure did not complete correctly, repeat the operation.

Posted on 15 April 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter of a 2011 Buick LaCrosse.
How to replace the air filter of a 2011 Buick LaCrosse.
Buick Lacrosse (2010-2016 / MK 2) If the engine of your 2011 Buick Lacrosse often experiences abnormal overheating and power loss, then it's time to replace the air filter. Below we w…
Battery replacement for Buick Lacrosse
Battery replacement for Buick Lacrosse
Buick Lacrosse (2010-2016 / MK 2) Below we will see the instructions that will allow us to disassemble and replace the battery of the Buick Lacrosse engine, in simple and quick steps.…
How to reset the maintenance light on the 2013 Bruick Lacrosse
How to reset the maintenance light on the 2013 Bruick Lacrosse
Buick Lacrosse (2010-2016 / MK 2) In the following guide we will go to discover together what are the various steps necessary to be able to correctly reset the maintenance light that …

Other guides you may be interested in

How to Replace the Brake Pads on a BMW X3

For this operation, you will need to remove the wheel where you will perform the replacement, so it will be convenient to lift your vehicle and place it on jack stands; this way, you will work much more comfortably. To remove the spring that holds the front pads, use a flathead screwdriver. Now, unscrew the bolts that secure the piston to the pads, then remove it, giving you access to both pads that brake the rotor. Of course, repeat the same steps on the other side if the same replacements are needed.

Watch the video!


by ScegliAuto

More videos