Do it yourself
| ||||
|
Buick Encore Gx - Video tutorial
Model: Buick Encore Gx
MK 2
- Years 2020-2024 If we want to replace the engine oil and the filter on this car, we can do it ourselves by following the instructions below and taking a look at the video. First open the bonnet and raise the car. Under it there are plastic hatches to be removed to access the oil drain plug, place a container on the floor to collect the used oil and proceed to unscrew the plug. Wait about ten minutes for all the oil to drain. exhausted has come out and screw the cap back on. Immediately next to the oil drain plug we find the filter which we can unscrew with the appropriate key and replace with the new one, always remembering to replace the gasket as well. Return to the upper part of the engine compartment and fill the circuit with new oil.
Posted on 13 April 2023 by ScegliAuto
Other guides that may interest you
|
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |