Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Buick
  4. :
  5. Encore Gx
  6. : How to replace Buick Encore Gx 1.3L engine oil and oil filter

Buick Encore Gx - Video tutorial

Model: Buick Encore Gx MK 2 - Years 2020-2024
Part: Engine oil
Operation: How to replace Buick Encore Gx 1.3L engine oil and oil filter

Today we will see how to carry out the routine maintenance service of the Buick Encore Gx oil change, replacing the engine oil and oil filter. First we open the engine hood and unscrew the engine oil filler cap; we lift the car and unscrew the oil vent bolt, letting it drain in a container for about ten minutes. At this point we unscrew the oil filter cartridge and replace it with the new one; screw it by hand and then tighten with a key. Finally, pour the new engine oil (in this case a 0W20), checking the level using the dipstick.


Posted on 25 April 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos