Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Xt5
    4. : Cabin air filter

Cadillac Xt5 - Cabin air filter

Cadillac Xt5 (2017-2024 / MK 1)
How to replace the cabin filter of the Cadillac XT5.
If you own a Cadillac XT5 and want to learn how to replace the cabin air filter, all you need to do is carefully read the following guide and put into practice …read all…
Posted on 23 September 2023 by ScegliAuto
Cadillac Xt5 (2017-2024 / MK 1)
How to replace the cabin air filter on Cadillac XT5
Let's see in this guide how to remove and replace the cabin air filter of the Cadillac XT5, in simple and quick steps. First of all we get on board the car and …read all…
Posted on 4 September 2022 by ScegliAuto
Cadillac Xt5 (2017-2024 / MK 1)
How to replace the cabin air filter on Cadillac Xt5
Do we want to replace the cabin air filter independently on this car model? In the video and description that are shown below we have summarized all the basic …read all…
Posted on 10 August 2022 by ScegliAuto
Battery (1) Bodywork (1) Key (1) -board computer (2) Checks and maintenance (6) Tail light (2) Air filter (1) Cabin air filter (3) Light bulb (1) Rear light bulb (2) Handle (1) Engine oil (3) Door panel (1) Front bumper (1) Brake pads (1) Door (1) Instrument cluster (1) Fuse box (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos