Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Cadillac Xt5 - Handle

Cadillac Xt5 (2017-2024 / MK 1)
How do you remove the exterior handle of the Cadillac XT5?
In order to remove the external handle of the Cadillac XT5 you need to open the door, so that you can loosen the screw located on its side, inside the hole …read all…
Posted on 3 September 2022 by ScegliAuto
Battery (1) Bodywork (1) Key (1) -board computer (2) Checks and maintenance (6) Tail light (2) Air filter (1) Cabin air filter (3) Light bulb (1) Rear light bulb (2) Handle (1) Engine oil (3) Door panel (1) Front bumper (1) Brake pads (1) Door (1) Instrument cluster (1) Fuse box (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos