Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Cadillac Xt5
    4. : Rear light bulb

Cadillac Xt5 - Rear light bulb

Cadillac Xt5 (2017-2024 / MK 1)
How to replace the headlight and taillight bulbs of the Cadillac XT5.
Today's procedure will illustrate the steps on how to disassemble and replace the rear headlight and its bulbs on the Cadillac XT5. First, we open the rear …read all…
Posted on 6 November 2023 by ScegliAuto
Cadillac Xt5 (2017-2024 / MK 1)
How to replace the rear light bulb on the Cadillac XT5?
In order to replace the rear headlight bulb of the Cadillac XT5, you need to remove the inner wheel arch cover corresponding to the bulb to be replaced, so …read all…
Posted on 25 April 2024 by ScegliAuto
Battery (1) Bodywork (1) Key (1) -board computer (2) Checks and maintenance (6) Tail light (2) Air filter (1) Cabin air filter (3) Light bulb (1) Rear light bulb (2) Handle (1) Engine oil (3) Door panel (1) Front bumper (1) Brake pads (1) Door (1) Instrument cluster (1) Fuse box (1) Steering wheel (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos