Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. Ct5
    4. : How to remove the rear emblems on the Cadillac CT5

Cadillac Ct5 - Video tutorial

Model: Cadillac Ct5 MK 1 - Years 2020-2024
Operation: How to remove the rear emblems on the Cadillac CT5

Let's see today in this short and simple guide how to remove and replace the emblems that we find on the tailgate of the trunk of the Cadillac CT5. First, let's move to the back and start heating our emblems with a heat torch; after that we use a thin wire of metal to remove the emblems, as shown in the video. At this point we are going to remove the adhesive or the dripping that the emblems leave on the bodywork, using a special degreaser; we carry out a polishing with wax to finish the work, following the video tutorial to the end!


Posted on 11 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos