Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Hood on a 2013 Cadillac ATS

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Body

Video tutorial

In this video, we show you how to replace the hood on a 2013 Cadillac ATS. First, make sure to order the correct part for the model in question. In this case, it is a hood with vents for engine ventilation and a glossy finish.

From this point, start unscrewing the bolts that secure the hood to its hinges as shown in the video (first on one side and then the other). Now, place the new hood on the support brackets and begin tightening the bolts to secure it back to the hinges.

When finished, gently close the hood and ensure it is perfectly centered.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Cadillac ATS?
How to Replace the Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) To replace the battery on a Cadillac ATS, open the trunk to access the components inside. Here, you can detach the rivets that secure the carpet and …
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
Cadillac ATS (2013-2019 / MK 1) Today, we will go through the instructions to remove and replace the spark plugs in the Cadillac ATS 2.0L. First, open the hood of your car and start…
How to Replace the Radio in a Cadillac ATS?
How to Replace the Radio in a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) To replace the radio in a Cadillac ATS, use a tool to pry off the side trim pieces along the central dashboard panel. Once the trim pieces are remove…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos