Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Spark Plugs in the Cadillac ATS 2.0L

Model: Cadillac ATS MK 1 - Years 2013-2019
Part: Spark plugs

Today, we will go through the instructions to remove and replace the spark plugs in the Cadillac ATS 2.0L. First, open the hood of your car and start by removing the upper plastic cover by unscrewing the screws; then disconnect the electrical connectors from the coils, and unscrew their screws to remove them (using a 10 mm socket wrench), as shown in the video. At this point, use a socket wrench with an extension to unscrew and remove the spark plugs, replacing them with new ones; hand-tighten them and gently tighten with the wrench!

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Cadillac ATS (2013-2019 / MK 1) To replace the battery on a Cadillac ATS, open the trunk to access the components inside. Here, you can detach the rivets that secure the carpet and …
Cadillac ATS (2013-2019 / MK 1) To replace the radio in a Cadillac ATS, use a tool to pry off the side trim pieces along the central dashboard panel. Once the trim pieces are remove…
Cadillac ATS (2013-2019 / MK 1) Replacing the battery inside the remote control of your Cadillac ATS is really very simple. To complete the operation in a few minutes and without en…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos