Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Cadillac ATS remote control

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

Video tutorial

Replacing the battery inside the remote control of your Cadillac ATS is really very simple. To complete the operation in a few minutes and without encountering any difficulties, you must carefully read the steps described in the following guide and then put them into practice.

First of all, purchase a new CR2032 battery and then take the car remote and remove the emergency key from inside. Once you have done this, remove the back cover with the help of a flathead screwdriver and then proceed with the replacement of the exhausted battery.


Posted on 11 April 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery on a Cadillac ATS?
How to Replace the Key Fob Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) In this tutorial, you will see how to replace the key fob battery on a Cadillac ATS. For this simple and quick operation, you will need a replacement…
How to Replace the Key Fob Battery on a Cadillac ATS?
How to Replace the Key Fob Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) In this tutorial, you will learn how to replace the key fob battery on a Cadillac ATS, a very simple and low-cost operation. To do this, get a small …
How to Replace the Remote Battery on Cadillac ATS
How to Replace the Remote Battery on Cadillac ATS
Cadillac ATS (2013-2019 / MK 1) To replace the remote battery on Cadillac ATS, first prepare the necessary materials: a remote battery, model: "CR 2032 3V", and a small flathead scr…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos