Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. ATS
    4. : How to change the battery on the Cadillac Ats

Cadillac ATS - Video tutorial

Model: Cadillac ATS MK 1 - Years 2013-2019
Part: Battery
Operation: How to change the battery on the Cadillac Ats

If we need to replace the battery on this car model we can find useful tips on how to behave in the description below in the video. First open the tailgate and locate the compartment containing the battery which is located on the left side and is protected by a plastic panel that must be removed. Subsequently it will be necessary to remove the fixing clips of the upholstery panel on the left side and then proceed to disconnect first the negative terminal and then the positive one. After that we can extract the battery from its housing and replace it with the new one and proceed to reconnect first the positive pole and then the negative and finally we can proceed to reassemble the various components backwards.


Posted on 21 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos