Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Cadillac ATS

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

Video tutorial

To replace the battery on this vehicle model, find useful information on how to proceed in the description below and in the video. On this vehicle model, the battery is located in the trunk on the left side.

To access it, remove the upper plastic panel and the side trim panel. Disconnect the negative terminal first, then the positive terminal.

Next, remove the support nuts for the hold-down bracket, and at that point, you can extract the battery. Position the new battery, reconnect the positive terminal first, then the negative terminal, and finally, reattach the hold-down bracket nuts.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery in a Cadillac ATS
How to Replace the Key Battery in a Cadillac ATS
Cadillac ATS (2013-2019 / MK 1) If you own a Cadillac ATS and want to know the steps to replace the dead battery inside the key, just read this guide and follow the described steps.…
How to Replace the Key Battery for the Cadillac ATS
How to Replace the Key Battery for the Cadillac ATS
Cadillac ATS (2013-2019 / MK 1) If the smart key for your Cadillac ATS is no longer working and you want to replace the battery inside, simply follow the steps outlined in this mini…
How to replace the battery of the Cadillac ATS remote control
How to replace the battery of the Cadillac ATS remote control
Cadillac ATS (2013-2019 / MK 1) Replacing the battery inside the remote control of your Cadillac ATS is really very simple. To complete the operation in a few minutes and without en…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos