Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replace the Headlight Bulb in the Cadillac ATS

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Headlight bulb

Video tutorial

Here are the main steps to remove and replace the headlight bulb in the Cadillac ATS. First, move to the front wheel well and remove the plastic cover protecting the bulbs (turn the wheel to access it); then disconnect the electrical connector of the bulb to remove it and replace it with a new one, as shown in the video.

Now install the new low beam bulb (in this case, an LED type); then reassemble everything, following the video tutorial until the end!


Updated on 27 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Cadillac ATS?
How to Replace the Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) To replace the battery on a Cadillac ATS, open the trunk to access the components inside. Here, you can detach the rivets that secure the carpet and …
How to Change the License Plate Bulb on Cadillac ATS
How to Change the License Plate Bulb on Cadillac ATS
Cadillac ATS (2013-2019 / MK 1) Let's see how to change the license plate bulb on the Cadillac ATS: first, lift the rear hatch for easy access to the license plate lights. You'll ne…
How to Replace the Radio in a Cadillac ATS?
How to Replace the Radio in a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) To replace the radio in a Cadillac ATS, use a tool to pry off the side trim pieces along the central dashboard panel. Once the trim pieces are remove…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos