Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Radio in a Cadillac ATS?

Model: Cadillac ATS MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Car stereo

Video tutorial

To replace the radio in a Cadillac ATS, use a tool to pry off the side trim pieces along the central dashboard panel. Once the trim pieces are removed, unscrew the screws on the sides and top that secure the central panel: this can now be detached, allowing you to disconnect the connectors at the back.

Now, slide the radio display out of its housing and replace it with a new one; it should then be properly connected and secured with the corresponding screws.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a Cadillac ATS?
How to Replace the Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) To replace the battery on a Cadillac ATS, open the trunk to access the components inside. Here, you can detach the rivets that secure the carpet and …
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
How to Replace the Spark Plugs in the Cadillac ATS 2.0L
Cadillac ATS (2013-2019 / MK 1) Today, we will go through the instructions to remove and replace the spark plugs in the Cadillac ATS 2.0L. First, open the hood of your car and start…
How to Replace the Key Fob Battery on a Cadillac ATS?
How to Replace the Key Fob Battery on a Cadillac ATS?
Cadillac ATS (2013-2019 / MK 1) In this tutorial, you will see how to replace the key fob battery on a Cadillac ATS. For this simple and quick operation, you will need a replacement…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos