Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Cadillac
    3. :
  3. ATS
    4. : How to change the license plate bulb on the Cadillac ATS

Cadillac ATS - Video tutorial

Model: Cadillac ATS MK 1 - Years 2013-2019
Part: Checks and maintenance
Operation: How to change the license plate bulb on the Cadillac ATS

Let's see how to change the license plate bulb on the Cadillac ATS: first we lift the tailgate, so we will have easy access to the license plate lights. We will need a flathead screwdriver with which we will pry the small optical group that houses one of the license plate lights. Once moved away, the optical group comes off easily: by making a half turn on the connector you can remove it completely. By pulling out the connector, you will also bring out the bulb. In this case you can already see it in the led. Now put it back in, give it half a turn and put the small optical unit back in its place. Press lightly to secure it in place. You can proceed with the one on the left. Job finished.


Posted on 5 September 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos