Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Bolt Ev - Battery

Chevrolet Bolt Ev (2017-2024 / MK 1)
Replacement of the traction battery of the Chevrolet Bolt EV.
In this guide, we will show you how to disassemble and replace the traction battery of the Chevrolet Bolt EV. First, we lift the vehicle and begin removing the …read all…
Posted on 24 June 2023 by ScegliAuto
Chevrolet Bolt Ev (2017-2024 / MK 1)
How to replace the battery on the Chevrolet Bolt Euv ?
If we need to replace the car battery, it is necessary to follow the instructions below: first of all, open the bonnet and locate the battery located on the …read all…
Posted on 24 November 2022 by ScegliAuto
Chevrolet Bolt Ev (2017-2024 / MK 1)
How should you recharge the Chevrolet Bolt Ev
In this video tutorial you can see how you can recharge the Chevrolet Bolt Ev. The Chevrolet Bolt Ev has three types of chargers available. The cable is …read all…
Posted on 29 October 2022 by ScegliAuto
Chevrolet Bolt Ev (2017-2024 / MK 1)
How do i replace the battery of the Chevrolet Bolt EV?
In order to replace the battery of the Chevrolet Bolt EV you have to go and lift the car with a bridge, as the battery occupies the entire extension of the …read all…
Posted on 14 May 2024 by ScegliAuto
Car stereo (3) Battery (4) Key (1) -board computer (1) Checks and maintenance (2) Headlight (1) Cabin air filter (5) Headlight bulb (1) Wheel (1) Fuse box (1) Seat (1) Manufacturer's coat of arms (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos