Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Tahoe
    4. : 2000-2006 (Gmt800)

Chevrolet Tahoe Years 2000-2006 (Gmt800)

Chevrolet Tahoe (2000-2006 / Gmt800)
How to program a new remote in the Chevrolet Tahoe?
In this tutorial, we can see how to program a new remote control in the Chevrolet Tahoe, a very simple and quick operation. To do this, we will need a working …read all…
Posted on 27 March 2024 by ScegliAuto
Chevrolet Tahoe (2000-2006 / Gmt800)
To reset the oil light on the 2004 Chevrolet Tahoe.
If the oil light on the instrument panel of your 2004 Chevrolet Tahoe continues to illuminate even after recently replacing the oil and oil filter, then you …read all…
Posted on 7 September 2023 by ScegliAuto
Chevrolet Tahoe (2000-2006 / Gmt800)
How to reset the oil light on Chevrolet Tahoe
In this video tutorial we can see how to reset the oil light on Chevrolet Tahoe, following simple steps. When the oil change warning light comes on and this …read all…
Posted on 27 December 2022 by ScegliAuto
Chevrolet Tahoe (2000-2006 / Gmt800)
How to replace the cabin air filter on Chevrolet Tahoe
If we want to proceed with replacing the cabin air filter on this car in do-it-yourself mode, we will find the simple instructions reported in this …read all…
Posted on 4 June 2022 by ScegliAuto
Chevrolet Tahoe (2000-2006 / Gmt800)
How to replace the air filter on Chevy Tahoe
If we need to replace the air filter on this car we will find the instructions on how to behave in this description. After opening the bonnet, locate the …read all…
Posted on 13 November 2022 by ScegliAuto
Key (4) -board computer (1) Air filter (1) Cabin air filter (1) Instrument cluster (3) Fuse box (2)

See also:

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos