Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Oil Light on a 2004 Chevrolet Tahoe

Model: Chevrolet Tahoe Gmt800 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Service warning light

See other generations:
Video tutorial

If the oil light on the instrument panel of your 2004 Chevrolet Tahoe keeps coming on despite having recently replaced it along with the corresponding filter, follow this procedure to manually reset the oil light at no cost. First, turn on the instrument panel, then press the accelerator pedal firmly three times.

A few moments later, the reset of the oil light will be confirmed on the display, and the procedure will be successfully completed. You can then turn off the ignition or drive off.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

Chevrolet Tahoe (2015-2020 / Gmtk2uc, Gmtk2ug) Follow this guide to correctly complete the manual reset of the engine oil light on the instrument cluster of your 2020 Chevrolet Tahoe. First, get i…
Chevrolet Tahoe (2000-2006 / Gmt800) In this tutorial, you will see how to reset the oil light on a Chevrolet Tahoe by following simple steps. When the oil change light comes on and the …
Chevrolet Tahoe (2007-2014 / Gmt900) To manually reset the engine oil light on your 2013 Chevrolet Tahoe, follow the steps described in this mini guide. First, reach the driver's seat an…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Adjust the Headlights on a Volkswagen Golf 7

This brief video tutorial shows the necessary steps to manually adjust the headlights on a seventh-generation Volkswagen Golf, produced from 2012 to 2019. Adjusting the dipped beam headlights is a very simple task. Open the bonnet and locate the adjustment screw at the back of the headlights as shown in the video. Once located, use a 6 mm Allen key to turn the screw clockwise or anti-clockwise to raise or lower the beam.

Watch the video!


by ScegliAuto

More videos