Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Chevrolet
  4. :
  5. Tahoe
  6. : How to reset the oil light on the 2020 Chevrolet Tahoe

Chevrolet Tahoe - Video tutorial

Model: Chevrolet Tahoe Gmtk2ug, Gmtk2uc - Years 2015-2020
Part: Instrument cluster
Operation: How to reset the oil light on the 2020 Chevrolet Tahoe

Thanks to the following guide, you will finally be able to correctly reset the manual oil light on the instrument panel of your 2020 Chevrolet Tahoe. First of all, you need to reach the driver's seat and start the engine, then press the right directional arrow on the steering wheel and select "Reset". At this point, confirm the reset by pressing "Yes" and a few moments later the procedure is successfully completed. You can then turn off the instrument panel or start the engine of your Chevrolet Tahoe and drive away.


Posted on 28 March 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos