|
Do it yourself
| |||
| ||||
How to replace the rear brake pads of the Chevrolet Captiva
Model: Chevrolet Captiva
MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this guide we will see the instructions that will allow us to disassemble and replace the rear brake pads of the Chevrolet Captiva. First, lift the vehicle and start by removing the rear wheel, unscrewing the bolts; then we proceed to unscrew the fastening screws of the brake caliper to remove it from the disc, as shown in the video. At this point, press the caliper piston to retract it, removing and replacing the brake pads with new original ones; reassemble the caliper on the disc and replace the other pads in the same way.
Posted on 5 September 2025 by ScegliAuto
Related tutorials
Chevrolet Captiva
(2006-2018 /
MK 1)
To replace the rear brake pads on the Chevrolet Captiva, you need to lift the car so that the corresponding wheel is not in contact with the ground. …
Chevrolet Captiva
(2006-2018 /
MK 1)
Before you can start, open the rear tailgate of the boot of your Chevrolet Captiva. Begin by removing the rear lights, simply by unscrewing the fixin…
Other guides you may be interested in
|
How to Open the Fuel Flap on a Volkswagen Tiguan?
To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |