Do it yourself
Frequently asked questions about cars and motorcycles

Removing Door Panel from Chevrolet Aveo

Model: Chevrolet Aveo MK 1, T200 - Years 2002-2011
Part: Door trim panel

Today, in this video tutorial, you will learn how to remove the door panel from a Chevrolet Aveo. First, open the door and use a plastic lever to remove the grab handle; then unscrew the screws found underneath and subsequently unscrew all the side screws located on the edges of the panel. Pry off the plastic frame of the opening handle and unscrew the additional screws found underneath. At this point, begin to unclip the panel from the sides, prying in multiple places, and pull it out, disconnecting the cable from the handle.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Chevrolet Aveo (2002-2011 / MK 1, T200) Let's see how to remove the door panel from a Chevrolet Aveo. Remove the cover of the opening handle and unscrew the screws underneath with a screwdr…
Chevrolet Aveo (2002-2011 / MK 1, T200) Removing the door panel on this Chevrolet model is very straightforward. Start by obtaining a plastic bodywork spatula to unclip and remove the cover…
Chevrolet Aveo (2002-2011 / MK 1, T200) To replace the external handle on a Chevrolet Aveo, you need to unscrew the screws that secure the door panel to its housing: these screws are locate…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos