Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Captiva
    4. : Chevrolet Captiva turns off the warning light

Chevrolet Captiva - Video tutorial

Model: Chevrolet Captiva MK 1 - Years 2006-2018
Part: Checks and maintenance
Operation: Chevrolet Captiva turns off the warning light

Do we want to reset the service light on our car? Let's see how to reset on a Chevrolet Captiva We turn on the instrument panel with the appropriate key (we will see the maintenance warning light), turn off the instrument panel, turn on the instrument panel and press the accelerator pedal 3 times. Finally, we turn off the instrument panel with the appropriate key, then turn it back on immediately to check the maintenance carried out (the warning light no longer remains fixed). We reset and set the options with the vehicle stopped and off. We use the information framework to check the lights on.


Posted on 29 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Captiva 2006-2018 - What problems does the Chevrolet Captiva have? Read Answer
    • Captiva 2006-2018 - Where is the temperature sensor located on Chevrolet Captiva? Read Answer
    • Captiva 2006-2018 - What warning lights are there in the dashboard of the Chevrolet Captiva? Read Answer
    • Captiva 2006-2018 - How to reset the service light on Chevrolet Captiva? Read Answer
    • Captiva 2006-2018 - What warning lights can be found on the Chevrolet Captiva? Read Answer
    • Captiva 2006-2018 - What are the Chevrolet Captiva dashboard warning lights? Read Answer
    • Captiva 2006-2018 - Where is the bottom cap of the oil pan on a Chevrolet Captiva? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos