Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions to Reset Airbag Light on Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, follow the main instructions on how to reset the airbag light on a Chevrolet Captiva in simple steps. Before resetting the light, ensure the underlying issue that triggered the sensor has been resolved (for example, due to an accident); assuming all airbag connectors are connected (and all airbags in the vehicle are present), connect your OBD unit and reset the airbag light by performing a fault check (selecting the make and model of the car and following the reset procedure).


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Modifying Headlights on Chevrolet Captiva
Modifying Headlights on Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
How to Reset the Service Light on the Chevrolet Captiva
How to Reset the Service Light on the Chevrolet Captiva
Chevrolet Captiva (2019-2026 / Cn202s) In this video, you will see how to reset the service light on the Chevrolet Captiva. There are two versions of this vehicle; the first produced until…
How to reset the service light on the Chevrolet Captiva
How to reset the service light on the Chevrolet Captiva
Chevrolet Captiva (2006-2018 / MK 1) Let's see how to reset the service light on the Chevrolet Captiva. It is a very simple operation. First, get into the vehicle and close all four door…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos