Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the service light on the Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

Let's see how to reset the service light on the Chevrolet Captiva. It is a very simple operation.

First, get into the vehicle and close all four doors, then put the key in the "ON" position without starting the engine. Pull the handbrake.

Press the accelerator pedal and then release it three times; each time do this for five seconds. At this point, you can switch off the ignition.

Turn it back on to confirm that the light, which briefly illuminates when the ignition is turned on, goes out after a few seconds. The operation is complete.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Chevrolet Captiva (2006-2018 / MK 1) .. This article explains how to reset the service light on the Chevrolet Captiva. The procedure is simple and requires no tools.. …
Chevrolet Captiva (2006-2018 / MK 1) Today we will show you how to reset the service light on a Chevrolet Captiva vehicle. The steps to follow are simple and quick to perform independent…
Chevrolet Captiva (2006-2018 / MK 1) In this article, you will learn how to reset the service light on a Chevrolet Captiva if it does not reset after a service. To reset this light, firs…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos