Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Chevrolet Captiva

Model: Chevrolet Captiva MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Service warning light

See other generations:
Video tutorial

This article explains how to reset the service light on the Chevrolet Captiva. The procedure is simple and requires no tools or software.

It is recommended to perform this procedure only after the vehicle has had its service completed. To reset the light, turn on the ignition without starting the engine, then within 5 seconds, press the accelerator pedal fully down three times.

Note that you may need to repeat the procedure three times to successfully reset the light. After completing the procedure, if successful, the light will turn off automatically.


Updated on 19 October 2026 by ScegliAuto


Related tutorials

Chevrolet Captiva (2006-2018 / MK 1) Modify bi-xenon headlights on Captiva. …
Chevrolet Captiva (2006-2018 / MK 1) In this video tutorial, follow the main instructions on how to reset the airbag light on a Chevrolet Captiva in simple steps. Before resetting the li…
Chevrolet Captiva (2019-2026 / Cn202s) .. In this video, you will see how to reset the service light on the Chevrolet Captiva. There are two versions of this vehicle; the.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos