Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on the Chevrolet Cruze MK1

Model: Chevrolet Cruze MK 1, J300 - Years 2009-2015
Part: Headlight bulb

In today's video, we will see the main steps to dismantle and replace the front headlamp bulb on the first series Chevrolet Cruze. First, open the bonnet of your car by pulling the lever inside; then disconnect the electrical connector of the bulb found at the back of the headlamp and rotate the bulb itself, along with the holder, to remove it, as shown in the video. At this point, replace it with the new one of the correct type, inserting it properly; all that remains is to apply the reverse procedure for reassembly!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Chevrolet Cruze
How to Replace the Front Headlight Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) If you want to independently replace the front headlight bulb on your first-generation Chevrolet Cruze (2009-2015) but are unsure how to proceed, pay…
How to replace the headlight bulb of the Chevrolet Cruze
How to replace the headlight bulb of the Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) The first thing to do when the front headlight stops working is to try replacing the bulb. To replace the headlight bulb of the Chevrolet Cruze, we n…
Replacing the Front Light Bulb on a Chevrolet Cruze
Replacing the Front Light Bulb on a Chevrolet Cruze
Chevrolet Cruze (2009-2015 / MK 1, J300) In this video tutorial, we will see how to remove and replace the front light bulb on a Chevrolet Cruze. First, open and lift the car's bonnet and lo…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos