Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Wiper on the Chevrolet Bolt EV

Model: Chevrolet Bolt Ev MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

Video tutorial

In today's tutorial video, you will learn how to disassemble and replace the rear wiper of the Chevrolet Bolt EV in simple and quick steps. First, move to the back of the vehicle and start removing the cover or plastic clip found on the rear wiper; then rotate and detach the wiper from its arm to remove it, as shown in the video.

At this point, install the new wiper, securing it properly on the arm; finally, reattach the plastic cover on the rear wiper, following the video until the end!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Chevrolet Bolt Ev (2017-2024 / MK 1) The fuse box located in the cabin of a Chevrolet Bolt EV is on the driver's side, positioned behind the dashboard to the left of the steering wheel. …
Chevrolet Bolt Ev (2017-2024 / MK 1) In this video tutorial, you can see how to charge the Chevrolet Bolt EV. The Chevrolet Bolt EV has three types of chargers available. The cable comes…
Chevrolet Bolt Ev (2017-2024 / MK 1) In this guide, you will learn how to remove and replace the traction battery of the Chevrolet Bolt EV. First, raise the vehicle and start removing th…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Tyre Pressure Light on the Hyundai i20

These brief instructions will show you how to reset the tyre pressure monitoring system (TPMS) light on the Hyundai i20. Before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get inside the cabin and turn on the ignition. Now, press and hold the TPMS reset button located on the left side of the driver's seat until the tyre pressure light resets on the instrument panel, as shown in the video. At this point, turn off the ignition and start the engine to complete the process!

Watch the video!


by ScegliAuto

More videos