Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Chevrolet
    3. :
  3. Bolt Ev
    4. : How to locate fuses and know their diagrams in a Chevrolet Bolt Ev

Chevrolet Bolt Ev - Video tutorial

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Operation: How to locate fuses and know their diagrams in a Chevrolet Bolt Ev

The fusile box located in the cockpit of a Chevrolet Bolt Ev car is located on the driverâ € ™ s side, exactly behind the dashboard to the left of the steering wheel. The second box, on the other hand, is located in the engine compartment so to access it it will be necessary to lift the hood of the car and locate it near the battery. The fuse box in the passenger compartment contains: video processing module, TCP, CGM, amplifier, data link connector, parking assist, USB sockets, wireless module, display, instrument cluster, heated steering wheel, ventilation system, air conditioning, front camera module , diagnostic socket, etc. The box located in the engine compartment instead contains: electric windows, horn, wiper motor, electronic brake control module, rear wiper, tailgate, window cleaner, lumbar electric seat, rear window defroster, fuel pump, oil pump, humidity sensor, ECU, on-board interface , etc.


Posted on 21 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos