Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Seats of the Chevrolet Bolt EV

Model: Chevrolet Bolt Ev MK 1 - Years 2017-2024
Part: Seat

Today, you will see in this brief and simple guide how to remove the rear seats of the Chevrolet Bolt EV by following the instructions below. First, open the rear doors and start pulling the small lever located under the rear bench seat to lift and remove it; then disconnect the wiring found underneath, removing the seatbelt attachments if necessary, as shown in the video. At this point, unscrew the bolts at the base of the seatbacks to completely remove the rear seats; then reassemble everything by applying the reverse procedure!

Updated on 4 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to disassembling the traction battery of the Chevrolet Bolt
Guide to disassembling the traction battery of the Chevrolet Bolt
Chevrolet Bolt Ev (2017-2024 / MK 1) Today we will see the main information useful for disassembling and replacing the traction battery of the Chevrolet Bolt. First of all, we lift the v…
Replacing the Traction Battery of the Chevrolet Bolt EV
Replacing the Traction Battery of the Chevrolet Bolt EV
Chevrolet Bolt Ev (2017-2024 / MK 1) In this guide, you will learn how to remove and replace the traction battery of the Chevrolet Bolt EV. First, raise the vehicle and start removing th…
How to Replace the Wheel on the Chevrolet Bolt EV
How to Replace the Wheel on the Chevrolet Bolt EV
Chevrolet Bolt Ev (2017-2024 / MK 1) In this brief and simple guide, follow the instructions to remove and replace the wheel on the Chevrolet Bolt EV. First, position the jack in the des…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos